1/32 USAF F-86 Tail Codes ver 1.0

Description

This is a sheet of water-slide or dry transfer decals for marking aircraft models.

These dry transfer decal sheets from Hobbydecal include tail codes for 1/32 F-86s. There are two copies of the sheet shown in the photo, enough for both sides of the vertical stabilizer (just rotate the checked portion 90 degrees for the opposite side).

Real aircraft have painted-on stencils. Waterslide decals are printed on a clear carrier film which is usually visible after application and does not convey the “painted-on” look that dry transfers will. This is especially noticeable on natural metal aircraft like the Sabre. While more care is required during application, the result is such a marked improvement over waterslide decals that you will probably want to use dry transfers on all your models!

IMPORTANT NOTE ABOUT DRY TRANSFERS: Unlike regular decals where the lettering is attached to a clear carrier film that will “silver” if not applied to a glossy surface, with dry transfers the individual lettering is printed directly on the backing sheet, and is applied to the model directly through light rubbing. As a result, dry transfers do not require a glossy surface, and in fact will not stick well to one. For ease of application, it is recommended that the dry transfers be applied to a matte surface, as that will provide the “tooth” needed for the transfer to properly grip the surface and come free of the backing sheet. If a glossy finish is desired, a gloss topcoat can be applied after the transfers have been placed on the model.